China Type Ga308-300 Sizing Machine

• Type: Sizing Machine
• Voltage: 220V
• Computerized: Computerized
• Precision: High Precision
• Certification: CE, ISO9001: 2000
• Warranty: 1 Year
• Model NO.: GA308
• Customized: Customized
• Condition: New
• Color: Customized
• Transport Package: Export Packing
• Specification: good quality
• Trademark: Wiltoptex
• Origin: China
• HS Code: 8445901000
• Production Capacity: 10PCS/Month

Product Description

1.2  Main technical parameter:

1.2.1  Application:GA308 serial sizing machine is used for the warp of pure cotton, polyester cotton and staple fabric of chemical fiber blends with wide breadth, which has all kinds of number in 97tex~6tex(6^S~100^S).

1.2.2  Nominal width(Option):3000mm; 

1.2.3  Speed: 2-100 m/min   crawl speed:2m/min  snail speed:0.5m/min

1.2.4 Max. dia. of weaving beam(mm): Φ800  

1.2.5  Max. winding tension(N):6000

1.2.6  Working width of warping beam, sizing box, drying cylinder(mm):1800mm

1.2.7  Quantity of drying cylinder:12

1.2.8  Drying capacity(Kg/hr):800

1.2.9  Total power:69KW (average actual power < 15Kw/h)

1.3   Component

1.3.1  Warp beam creel  

1.3.1.1  Type: Wheel support,Working width: 1800mm; Max. dia. Of warp beam: 800mm

1.3.1.2  Number of warp beam 20 (not including beam), 4 beams per unit, vertical placement , Footplate between two units for operating. 

1.3.2  Sizing box 

1.3.2.1  Double immersion and double squeezing. Two sizing boxes fall down horizontally. The construction of sizing box is completely same. Two pieces of warp separately pass through a Leading roller, a tension roller, a couple of immersion roller, a sizing roller with lower pressure, a squeezing roller, a sizing roller with high pressure and a squeezing roller, then enter into cylinder drying chamber

1.3.2.2  Synchronous pneumatic squeezing in both side, high pressure varies linearly with machine speed

1.3.2.3  Pressure: No.2 squeezing roller: 0-40KN,pressure varies linearly with machine speed. No.1 squeezing roller:0-10KN,set steplessly. 

1.3.2.4  Frame is composed of steel sheet. Both inner layer and outer layer of the body is made of stainless steel.

1.3.2.5   The size in each sizing box is circulated by a circulation pump to meet preheating box and sizing box. The level height of the sizing box is controlled by adjusting the angle of level plate. The level height of the preheating box is controlled by the Float level controller.

1.3.2.6  Sizing roller is driven by an 4kw inverter motor(LENZE), and leading roller is also driven by an 4kw inverter motor(LENZE Germany) 

1.3.2.7   Temperature is controlled precisely with PID, setting in the OP screen, PLC,  proportional valve, and membrance valve.

1.3.3  Drying chamber 

1.3.3.1  Structure: Drying chamber is composed of 12 drying cylinders of stainless steel with Φ800mm., which max. working pressure 0.35Mpa.

1.3.3.2  Placement: 8  predrying  cylinders with teflon coating 

1.3.3.3  The drive is divided into three groups, two groups for predrying, and one for combined drying. The combined drying drive is of  positive drive by chain and chain wheel. All cylinders are driven by a 7.5kw inverter motor(LENZE Germany) through side shaft .

1.3.3.4  Temperature control:  Groups of temperature auto-control system for predrying chamber and drying chamber

1.3.3.5  Not supply Inclined-top steam hood (Supply by user)and supply 2 No. 6 axial flow fans.

1.3.3.6 Each group of predrying cylinders has two temperature control point ,and the combined drying cylinders have one .Temperature is controlled precisely with PID, setting in the OP screen, PLC,  proportional valve, and membrance valve

1.3.3.7  Evaporation capacity 800kg/h  

1.3.4  Dry area 

Single-side waxing device. Number of the main and small split rods according to the number of the warp beam creels.

1.3.5  Headstock

1.3.5.1  Dragging and winding driven by two AC motors. The max. winding tension 6KN.

Max. length of beam  3250mm

1.3.5.2  The weaving beam can be winded in turn and reversely, which meets the requirement of double-beam shuttleless loom with wide width

1.3.5.3  All are adopted with pneumatic control, such as weaving beam pressurization, braking, lifting & doffing weaving beam, tension roller tension, measuring roller lift ,zigzag lift and so on.

1.3.5.4  Length scale(cm) 

1.3.5.5  Zigzag reed jiggles left or right, up or down. Lift is adopted with pneumatic control. The body is made of aluminium alloy and sealed totally.

1.3.5.6  Printing  spray device.  Length measurement and marking device

1.3.5.7  Dragging roller coated with rubber is driven by an 7.5kw inverter motor(LENZE), and weaving beam winding is driven by an 22kw inverter motor(LENZE)

1.3.5.8  SIEMENS human machine interface, in English 

1.3.5.9  This machine is adopted with American STRANDBERG moisture monitor to control moisture regain.

1.3.6  Electrical control

1.3.6.1  With 7-unit inverter to drive individually. Parameters of GA308serial sizing machine are checked and controlled timely by one set of SIEMENS,S7-300 PLC and upper working station.

1.3.6.2 Colorful human machine interface. This computer can control both each unit in-phase according to the set elongation and each technological parameter in sizing course, including temperature PID control, pressure linear control, moisture regain control, Feed-in and wet area elongation  auto-control, dry area elongation and tension auto-control , winding and unwinding constant tension control.

1.3.6.3  Have the function of storage and memory for each technological parameters ,management date, .and working state curve, and displaying the troubles .

2.  Main fittings supplied with machine (supplied by seller) 

2.1  List of important components

No	Name	Country
1	PLC  S7-300	SIEMENS
2	Human machine interface	SIEMENS
3	Sensor	LENZE
4	Winding inverter EVF9328-EV	LENZE
5	Dragging inverter EVS9327-ES	LENZE
6	Cylinders inverter EVS9327-ES	LENZE
7	Sizing inverter EVS9325-ES	LENZE
8	Leading inverter EVS9325-ES	LENZE
9	Rectifier	LENZE
10	Reactor ELN3-0075H045	LENZE
11	Winding motor	LENZE
12	Dragging ,cylinders motor and speed reducer	LENZE
13	Proportional pressure regulator	FESTO or SMC
14	Rotary encoder	LENZE
15	Low voltage electric	TE
16	Precise filtration valve	FESTO or SMC
17	Joints for air pipe	FESTO
18	electromagnetic valve, air cylinders	FESTO or SMC
19	Key bearings (sizing ,dragging, and so on)	FAG or NSK
20	Moisture monitor	America STRANDBERG

 

 2.3 A set of Spare parts 

No	Name	Qty
1	No.2 squeezing roller	1
2	No.1squeezing roller	1
3	immersion roller	1
4	Shaft for immersion roller	2
5	Friction block for creel	30
6	Clip	2
7	sealing Sheet	2
8	Cover shee	2
9	Fixed mass	4
10	Fixed mass	4
11	Protection bag	4
12	Cylinder jacket	4
13	Pressing roller	4
14	Pressing roller	4
15	graphite ring for Steam Joint	12
16	V-belt for main motor	4
17	Joint	4
18	Joint	4
19	Joint	4
20	Joint	4
21	Gasketet seal	2
22	Gasketet seal	2
23	Metal hose	6
24	Metal hose	6
25	Pt. thermal resistance thread G1/2length 325mm	1
26	Pt. thermal resistance thread G1/2length 685mm	1
27	A set of reed(23 teeth)	1
28	Cover	4
29	Roller for Wheel support	4

 

3.  Preparing work(supplied by user) 

3.1  Auxiliary wire underground(except main cable and signal line of  7-unit motor)

3.2  Voltage: 380V 50HZ ripple<5%

3.2.1 Total power: 69Kw (except other device such as lighting,compressor, boiler, cooking system etc.)                     

3.2.2 Threading the cables for 7-unit motor, the power cable and the cable of    circumrotation coder is separated out by steel pipe, individually done.

3.3  One set of air compressor with 1Mpa pressure ,0.7Mpa output pressure , and 0.6m3/min flow

Purify requirement:demoisture(dryness)  Atmosphere pressure dew point <-17ºC

            Deoil   filtration <3μ,oil content <0.1PPM/W

Deimpurity   filtration <5μ

3.4  Steam requirement:saturated steam, pressure >0.5 Mpa,flow >1.5T/h

Cooking system

Inclined-top steam hood by user.

3.5   Working ambient: temperature 5ºC-45ºC, Relative humidity 40-90%

3.6   Normal tool (supplied by user)

3.7   Installation

One mechanical engineer and one electrical engineer from manufacturer for installing ,and 6-8 workers from user for assisting. User should pay the seller's engineers the return international air ticket, and local boarding and lodging, local transportation, stander room with AC and toilet.